Streetbond 150 A 3.75 gallon B 1 quart Kit And Colorant
In stock
From $329.58
To $392.44
*This is a special order product- subject to return restrictions. Shipping and return policy
Streetbond 150 A 3.75 gallon B 1 quart Kit And Colorant
StreetBond SB 120 is a two-component, advanced, waterborne, epoxy-modified acrylic coating that incorporates factory-blended, durable UV-stable pigments that help protect the substrate from the damaging effects of UV rays and heat while enhancing the aesthetics of the pavement surface. Formulated for use on pedestrian areas with very low or no vehicular traffic.
A = 3.75 gallons
B = 1 Quart
Colorant
StreetBond Colorants are water-based, epoxy-modified acrylic color additives (Part C) mixed with StreetBond SB120 or SB150 pavement coatings. They are designed to add rich, uniform, and skid-resistant color to both asphalt and properly primed concrete surfaces like crosswalks, streetscapes, and driveways.
Streetbond 150 A 3.75 gallon B 1 quart Kit And Colorant
- Part A = Acrylic Resin Base
- Part B = Epoxy Hardner "Curing Agent"
- Coverage = 200 sqft in 3 thin coats.
- Formulated for use on pedestrian areas with very low or no vehicular traffic, StreetBond SB 120 can be used on textured (stamped) pavement, non-textured (flat) asphalt pavement, and on concrete with proper surface preparation.Ideal
- StreetBond SB 150 also meets ASTM E-303 standard for slip resistance, and can help protect the substrate from exposure to chemicals.
Colorant:
- StreetBond Traditional Colorants are water-based, epoxy-modified acrylic color additives (Part C) mixed with StreetBond SB120 or SB150 pavement coatings.
- They are designed to add rich, uniform, and skid-resistant color to both asphalt and properly primed concrete surfaces like crosswalks, streetscapes, and driveways.
- Once mixed, the catalyzed coating is typically applied in multiple coats via squeegee, roller, or heavy-bristle broom to ensure proper adhesion and build a durable, non-skid surface.
- Uses:
- Recreational & Athletic Surfaces
- Playgrounds
- Driveways
- Cycle Lanes
- Pedestrian Pathways
- Application Temperature: 50°F (10°C)
- VOC (Calculated): <50 g/L
- Drying Time: Touch dry at 1-4 hours at 77°F (25°C) and 40% humidity [ASTM D5895]
The warranty will be honored only through the manufacturer, GAF. If you need further assistance regarding your coverage or have other inquiries, please contact the manufacturer directly at 1-855-201-4989 or [email protected].
| Stock Info | Special Order |
|---|