GAF StreetBond 120 Part A 5 Gal
*This is a special order product- subject to return restrictions. Shipping and return policy
GAF StreetBond 120 Part A 5 Gal
StreetBond SB 120 is a two-component, advanced, waterborne, epoxy-modified acrylic coating that incorporates factory-blended, durable UV-stable pigments that help protect the substrate from the damaging effects of UV rays and heat while enhancing the aesthetics of the pavement surface. Formulated for use on pedestrian areas with very low or no vehicular traffic.
GAF StreetBond 120 Part A 5 Gal
- StreetBond SB 120 is a two-component epoxy-modified acrylic coating system designed for a variety of pavement solutions.
- SB 120 can be used to create athletic surfaces, playgrounds, and walkways in areas that see pedestrian foot traffic only.
- Coverage rate is roughly 200sq. ft. in 3 thin coats.
- This may vary based on the project and application method.
- Formulated for use on pedestrian areas with very low or no vehicular traffic, StreetBond SB 120 can be used on textured (stamped) pavement, non-textured (flat) asphalt pavement, and on concrete with proper surface preparation.Ideal
- StreetBond SB 120 also meets ASTM E-303 standard for slip resistance, and can help protect the substrate from exposure to chemicals.
Uses:
- Recreational & Athletic Surfaces
- Playgrounds
- Driveways
- Cycle Lanes
- Pedestrian Pathways
- Application Temperature: 50°F (10°C)
- VOC (Calculated): <50 g/L
- Drying Time: Touch dry at 1-4 hours at 77°F (25°C) and 40% humidity [ASTM D5895]
The warranty will be honored only through the manufacturer, GAF. If you need further assistance regarding your coverage or have other inquiries, please contact the manufacturer directly at 1-855-201-4989 or [email protected].
For other options, see "Related Products" below.
| Stock Info | Special Order |
|---|---|
| Manufacturer | GAF |
Write Your Own Review